630A front plug-in cable connector products are directly connected to the inlet and outlet bushings of the switch cabinet and the button-down bushings of the cable branch box to provide fully insulated safety lines for the switch cabinet and cable branch box.

The front insert work is connected to the switch cabinet sleeve seat with bolts; The tail can be plugged directly with an insulator or extended to connect the rear connector arrester. Advanced post-injection process, the outer layer has a shielding role of the semi-conductive layer, can be touched to ensure personal safety, unique stress cone structure, effective evacuation of electric field stress, to solve the cable shield layer cut off the electric field stress problem. Extensibility, flexible disassembly can complete the T-type connection of the cable, fully sealed, fully insulated, fully protected, maintenance-free, anti-flooding, anti-pollution.

The product conforms to the design standards of C-type casing in EN50180 and 50181

630A rear plug-in cable connector is used with front plug-in cable connector products. A branch of the 630A line, which cannot be directly connected to products such as bushing, can be plugged at the end with an insulator, and can also be extended to connect to another rear plug-in cable connector and rear plug-in arrester.

Advanced post-injection process, the outer layer has a shielding role of the semi-conductive layer, can be touched to ensure personal safety, unique stress cone structure, effective evacuation of power plant stress, to solve the cable shield layer cut off the power plant stress problem - scalable, flexible disassembly, can complete the cable T-connection, fully sealed, fully insulated, fully protected, maintenance-free, anti-flooding, anti-pollution.

The European rear plug arrester is connected to the front or rear plug to provide overvoltage protection for electrical equipment. The built-in zinc oxide valve plate of the plug has good nonlinear, so that the arrester has the characteristics of residual low pressure, large flow capacity, fast response time and steep wave flat, which can effectively prevent lightning strike and operation impact.

15KV, 630A insulation caps are accessories of live casing, providing insulation sleeves for live casing, dustproof and moisture-proof sleeves for non-live joints. The 630A insulation cap can be installed on the 630A bushing, busbar, and wall mount devices. If the busbar and cable connector have spare cables, seal them with the 630A insulation cap.

15(20)kV PT plug Transformer used to provide power to electric operating mechanisms or metering devices (primary winding with fuse protection, with cable plug bushing receptacles; The casing socket dimensions conform to the 25kV casing dimensions standard of IEEE Std 386) The high voltage ends provide fully insulated, fully shielded, and fully sealed connections.

The shielded PT connection kit is made of a shielded cable front (back) connector at one end and a PT toggle cable connector at the other end, which is made of a fully shielded flexible cable. After all installation is completed, the grounding wire is used to achieve full shielding and full sealing. This product can be bent arbitrarily, the cable length can be customized, to achieve the best solution.

By connecting with the cone insulator in the switchgear, the electrical connection between multiple switchgear can be realized.
System voltage: 8.7/15kV\12/20kV.
Continuous rated current: 630A\1250A.

By connecting with the casing of the switchgear, multiple switchgear can be connected.
System voltage: 8.7/15kV\12/20kV.
Continuous rated current: 630A\1250A.