630A front plug-in cable connector products are directly connected to the inlet and outlet bushings of the switch cabinet and the button-down bushings of the cable branch box to provide fully insulated safety lines for the switch cabinet and cable branch box.

The front insert work is connected to the switch cabinet sleeve seat with bolts; The tail can be plugged directly with an insulator or extended to connect the rear connector arrester. Advanced post-injection process, the outer layer has a shielding role of the semi-conductive layer, can be touched to ensure personal safety, unique stress cone structure, effective evacuation of electric field stress, to solve the cable shield layer cut off the electric field stress problem. Extensibility, flexible disassembly can complete the T-type connection of the cable, fully sealed, fully insulated, fully protected, maintenance-free, anti-flooding, anti-pollution.

The product conforms to the design standards of C-type casing in EN50180 and 50181

630A rear plug-in cable connector is used with front plug-in cable connector products. A branch of the 630A line, which cannot be directly connected to products such as bushing, can be plugged at the end with an insulator, and can also be extended to connect to another rear plug-in cable connector and rear plug-in arrester.

Advanced post-injection process, the outer layer has a shielding role of the semi-conductive layer, can be touched to ensure personal safety, unique stress cone structure, effective evacuation of power plant stress, to solve the cable shield layer cut off the power plant stress problem - scalable, flexible disassembly, can complete the cable T-connection, fully sealed, fully insulated, fully protected, maintenance-free, anti-flooding, anti-pollution.

The European rear plug arrester is connected to the front or rear plug to provide overvoltage protection for electrical equipment. The built-in zinc oxide valve plate of the plug has good nonlinear, so that the arrester has the characteristics of residual low pressure, large flow capacity, fast response time and steep wave flat, which can effectively prevent lightning strike and operation impact.

15KV, 630A insulation caps are accessories of live casing, providing insulation sleeves for live casing, dustproof and moisture-proof sleeves for non-live joints. The 630A insulation cap can be installed on the 630A bushing, busbar, and wall mount devices. If the busbar and cable connector have spare cables, seal them with the 630A insulation cap.

15(20)kV PT plug Transformer used to provide power to electric operating mechanisms or metering devices (primary winding with fuse protection, with cable plug bushing receptacles; The casing socket dimensions conform to the 25kV casing dimensions standard of IEEE Std 386) The high voltage ends provide fully insulated, fully shielded, and fully sealed connections.

The shielded PT connection kit is made of a shielded cable front (back) connector at one end and a PT toggle cable connector at the other end, which is made of a fully shielded flexible cable. After all installation is completed, the grounding wire is used to achieve full shielding and full sealing. This product can be bent arbitrarily, the cable length can be customized, to achieve the best solution.

By connecting with the cone insulator in the switchgear, the electrical connection between multiple switchgear can be realized.
System voltage: 8.7/15kV\12/20kV.
Continuous rated current: 630A\1250A.

By connecting with the casing of the switchgear, multiple switchgear can be connected.
System voltage: 8.7/15kV\12/20kV.
Continuous rated current: 630A\1250A.

630A front plug-in cable connector products are directly connected to the inlet and outlet bushings of the switch cabinet and the button-down bushings of the cable branch box to provide fully insulated safety lines for the switch cabinet and cable branch box.

The front insert work is connected to the switch cabinet sleeve seat with bolts; The tail can be plugged directly with an insulator or extended to connect the rear connector arrester. Advanced post-injection process, the outer layer has a shielding role of the semi-conductive layer, can be touched to ensure personal safety, unique stress cone structure, effective evacuation of electric field stress, to solve the cable shield layer cut off the electric field stress problem. Extensibility, flexible disassembly can complete the T-type connection of the cable, fully sealed, fully insulated, fully protected, maintenance-free, anti-flooding, anti-pollution.

The product conforms to the design standards of C-type casing in EN50180 and 50181.

630A rear plug-in cable connector is used with front plug-in cable connector products. A branch of the 630A line, which cannot be directly connected to products such as bushing, can be plugged at the end with an insulator, and can also be extended to connect to another rear plug-in cable connector and rear plug-in arrester.

Advanced post-injection process, the outer layer has a shielding role of the semi-conductive layer, can be touched to ensure personal safety, unique stress cone structure, effective evacuation of power plant stress, to solve the cable shield layer cut off the power plant stress problem - scalable, flexible disassembly, can complete the cable T-connection, fully sealed, fully insulated, fully protected, maintenance-free, anti-flooding, anti-pollution.

The European rear plug arrester is connected to the front or rear plug to provide overvoltage protection for electrical equipment. The built-in zinc oxide valve plate of the plug has good nonlinear, so that the arrester has the characteristics of residual low pressure, large flow capacity, fast response time and steep wave flat, which can effectively prevent lightning strike and operation impact.

20KV, 630A insulation caps are accessories of live casing, providing insulation sleeves for live casing, dustproof and moisture-proof sleeves for non-live joints. The 630A insulation cap can be installed on the 630A bushing, busbar, and wall mount devices. If the busbar and cable connector have spare cables, seal them with the 630A insulation cap.

630A front plug-in cable connector products, directly connected to the switch cabinet inlet and outlet bushing, cable branch box button-down bushing, for the switch cabinet and cable branch box to provide fully insulated safety lines, long underwater and other harsh conditions of operation. The tail can be blocked directly with an insulator, and it can also be extended to connect the rear connector arrester, which is suitable for crosslinked polyethylene cables with a cross-section of 35-500mm for 35kV cables.

Advanced post-injection process, the outer layer has a shielding role of the semi-conductive layer, can be touched to ensure personal safety, unique stress cone structure, effective evacuation of power plant stress, to solve the cable shield layer cut off the power plant stress problem - scalable, flexible disassembly, can complete the cable T-connection, fully sealed, fully insulated, fully protected, maintenance-free, anti-flooding, anti-pollution.

630A rear plug-in cable connector is used with front plug-in cable connector products. A branch of the 630A line, which cannot be directly connected to products such as bushing, can be plugged at the end with an insulator, and can also be extended to connect to another rear plug-in cable connector and rear plug-in arrester.

Advanced post-injection process, the outer layer has a shielding role of the semi-conductive layer, can be touched to ensure personal safety, unique stress cone structure, effective evacuation of power plant stress, to solve the cable shield layer cut off the power plant stress problem - scalable, flexible disassembly, can complete the cable T-connection, fully sealed, fully insulated, fully protected, maintenance-free, anti-flooding, anti-pollution.

The European rear plug arrester is connected to the front or rear plug to provide overvoltage protection for electrical equipment. The built-in zinc oxide valve plate of the plug has good nonlinear, so that the arrester has the characteristics of residual low pressure, large flow capacity, fast response time and steep wave flat, which can effectively prevent lightning strike and operation impact.

35KV, 630A insulation caps are accessories of live casing, providing insulation sleeves for live casing, dustproof and moisture-proof sleeves for non-live joints. The 630A insulation cap can be installed on the 630A bushing, busbar, and wall mount devices. If the busbar and cable connector have spare cables, seal them with the 630A insulation cap.

By connecting with the casing of the switchgear, multiple switchgear can be connected.
System voltage: 26/35kV.
Continuous rated current: 630A\1250A.

Products are divided into single core, two core, three core, four core, five core, has been widely used in low-voltage cable terminal treatment and intermediate connection.
Excellent surface hydrophobic migration, so that the surface of the product to maintain good anti-pollution ability.
Small size, light weight, reliable performance.
Scope of application: The product has excellent cold and heat resistance, especially suitable for high altitude areas, cold areas, wet areas, salt spray areas and heavily polluted areas. And installation without open fire, especially suitable for petroleum, chemical, mine, tunnel and other flammable and explosive places.

Products are divided into single core, three core, has been widely used in 8.7/15kV cable terminal processing and intermediate connection.
Maintain a constant packing force and breathe with the cable to ensure excellent interface characteristics.
Advanced production technology, vacuum high pressure injection vulcanization molding. Perfect internal structure, no defects, less than 10pc under 15kV.
Scope of application: High altitude area, cold area, wet area, salt spray area and heavy pollution area. And installation without open fire, especially suitable for petroleum, chemical, mine, tunnel and other flammable and explosive places.

Products are divided into single core, three core has been widely used in 12/20kV, 18/20kV cable terminal processing and intermediate connection.
Convenient and reliable installation, no need for open flame, suitable for petrochemical, coal and other anti-riot occasions.
Both conductive adhesive and insulating adhesive are made of imported liquid silicone rubber, with an extended shelf life of up to 24 months.
Scope of application: The product has excellent cold and heat resistance, suitable for high altitude areas, cold areas, wet areas, salt spray areas and heavily polluted areas. And installation without open fire, especially suitable for petroleum, chemical, mine, tunnel and other flammable and explosive places.

Products are divided into single core, three core, has been widely used in 26/35kV cable terminal processing and intermediate connection.
Long service life, exposed to the sun for 10 years, the material properties are basically unchanged.
The product structure adopts professional software to calculate the electric field division, and fully considers the various factors in the actual application of cable accessories (such as stress cone deformation, interface characteristics change), after several optimization and advanced design, the electric field distribution is more reasonable, and the product safety is higher.
Scope of application: High altitude area, cold area, wet area, salt spray area and heavy pollution area. And the installation does not use open fire, suitable for petroleum, chemical, tunnel and other flammable and explosive places.

European cable tap is widely used in power distribution network system in recent years in the cable engineering equipment, its main characteristics are two-way door, the use of wall bushing as a connection busbar, with a small length, clear cable arrangement, three-core cable does not need large span cross and other significant advantages of the cable joint used in line with DIN476 standard. Generally use rated current 630A bolted bolted connection type cable joint.

35kV outdoor cable distribution box as a cable distribution, continuation of the power distribution equipment, it will be a good combination of power distribution technology and insulation protection technology, with its small size, easy installation, good insulation performance, maintenance-free, economic application, convenient and flexible and many other characteristics, welcomed by the majority of users.
The shell is made of stainless steel plate, and the surface is anti-corrosion and electrostatic spray. It has the characteristics of high mechanical strength, dust, moisture, corrosion resistance, adaptability to various harsh environments and long maintenance-free life.
Cable plug selection of the world's leading prefabricated cable head, is fully insulated, fully sealed, fully shielded, touchable, flood control with strong flame retardant silicone rubber products. Using the international advanced post-injection insulation layer process, the electrical performance reaches the international leading level, and the use is safer and more reliable. Installation conditions are not affected by harsh environment, anti-condensation, anti-pollution, maintenance-free. Product stress treatment using German technology, one injection plastic molding, surface no seam line, high level of release, product structure size is small, fully meet the requirements of installation space.
Double-pass bushing is made of epoxy resin material, with high insulation strength, strong flow ability, and can withstand a certain cable tension.

Terminals are generally mainly composed of shell, screw, wire frame and conductive piece 4 most of the wiring, through the tightening screw, drive the wire frame upward, so that the wire and conductive piece tightly pressed, is the most common on the market, the most widely used terminal. Beautiful appearance and generous; At the same time equipped with a full range of accessories; End plates, grouping partitions, connecting parts, fixing parts, marking strips, etc.; U-type and G-type guides can be used. Reliable wiring, easy installation, complete wiring capacity.

Terminals are generally mainly composed of shell, screw, wire frame and conductive piece 4 most of the wiring, through the tightening screw, drive the wire frame upward, so that the wire and conductive piece tightly pressed, is the most common on the market, the most widely used terminal. Beautiful appearance and generous; At the same time equipped with a full range of accessories; End plates, grouping partitions, connecting parts, fixing parts, marking strips, etc.; U-type and G-type guides can be used. Reliable wiring, easy installation, complete wiring capacity.

Electric energy metering junction box is a special part for electrical equipment measurement, protection of the installation of watt-hour meters, electrical instruments, protection of breakers and other joint wiring in the secondary loop. It has multiple functions such as safe exchange and on-site verification of watt-hour meters, electrical instruments, protection breakers and so on under load.